Acura ILX Hybrid (2015 year). Instruction — page 12

uuBluetooth® HandsFreeLink®uHFL Menus
Auto Transfer
Set calls to automatically transfer from your phone to HFL when you
enter the vehicle.
Caller ID Info
Name Priority
Prioritize the caller’s name as the
caller ID.
Number Priority
Prioritize the caller’s phone number as
the caller ID.
Passcode*1
Create a security PIN for a paired phone.
Message Notice
Turn incoming text message notifications on or off.
System Clear
Clear the system of all paired phones, phonebook entries, and security
codes.
*1: Appears only when a phone is connected to HFL.
Continued
195

uuBluetooth® HandsFreeLink®uHFL Menus
1Phone Setup
Phone Setup
Your Bluetooth-compatible phone must be paired to
To pair a cell phone (when there is no
HFL before you can make and receive hands-free
phone paired to the system)
calls.
1. Press the PHONE button or the
button.
2. Rotate
to select Yes, then press
Phone Pairing Tips:
You cannot pair your phone while the vehicle is
3. Make sure your phone is in search or
moving.
discoverable mode, then press
Up to six phones can be paired.
u HFL automatically searches for a
Your phone’s battery may drain faster when it is
Bluetooth device.
paired to HFL.
If your phone is not ready for pairing or not found
by the system within three minutes, the system will
4. When your phone appears on the list, select
time out and returns to idle.
it by pressing
Once you have paired a phone, you can see it
u If your phone doesn’t appear, select
displayed on the screen with one or two icons on the
Phone Not Found? and search for
right side.
Bluetooth devices using your phone.
These icons indicate the following:
From your phone, select
: The phone can be used with HFL.
HandsFreeLink.
: The phone is compatible with Bluetooth® Audio.
5. HFL gives you a four-digit pairing code to
input on your phone.
When your phone prompts you, input the
four-digit pairing code.
6. You will receive a notification on the screen
if pairing is successful.
196

uuBluetooth® HandsFreeLink®uHFL Menus
To pair a cell phone (when a phone has
already been paired to the system)
1. Press the PHONE button or the
button.
u If a prompt appears asking to connect to
a phone, select No and proceed with
step 2.
2. Rotate
to select Phone Setup, then
press
3. Rotate
to select Connection, then press
4. Rotate
to select Add a New Phone,
then press
u The screen changes to Select Location.
5. Rotate
to select Empty, then press
Continued
197

uuBluetooth® HandsFreeLink®uHFL Menus
6. Make sure your phone is in search or
discoverable mode, then press
u HFL automatically searches for a
Bluetooth device.
7. When your phone appears on the list, select
it by pressing
u If your phone doesn’t appear, select
Phone Not Found? and search for
Bluetooth devices using your phone.
From your phone, select
HandsFreeLink.
8. HFL gives you a four-digit pairing code to
input on your phone.
When your phone prompts you, input the
four-digit pairing code.
9. You will receive a notification on the screen
if pairing is successful.
198

uuBluetooth® HandsFreeLink®uHFL Menus
To change the pairing code setting
1To change the pairing code setting
1. Press the PHONE button or the
button.
The default pairing code is 0000 until you change the
2. Rotate
to select Phone Setup, then
setting.
press
To create your own, select Fixed, and delete the
current code, then enter a new one.
For a randomly generated pairing code each time you
pair a phone, select Random.
3. Rotate
to select Connection, then press
4. Rotate
to select Pairing Code, then
press
5. Rotate
to select Fixed or Random, then
press
Continued
199

uuBluetooth® HandsFreeLink®uHFL Menus
To delete a paired phone
1. Press the PHONE button or the
button.
2. Rotate
to select Phone Setup, then
press
u Repeat the procedure to select
Connection, then Delete a Phone.
3. Rotate
to select a phone you want to
delete, then press
4. You will receive a confirmation message on
the screen. Rotate
to select Yes, then
press
u You will receive a notification on the
screen if it is successful.
200

uuBluetooth® HandsFreeLink®uHFL Menus
1To Set Up a Text Message Notice Option
To Set Up a Text Message Notice Option
On: A pop-up notification comes on every time you
1. Press the PHONE button or the
button.
receive a new text message.
2. Rotate
to select Phone Setup, then
Off: The message you receive is stored in the system
press
without notification.
3. Rotate
to select Message Notice, then
press .
4. Rotate
to select a mode you want, then
press
Continued
201

uuBluetooth® HandsFreeLink®uHFL Menus
1To Create a Security PIN
To Create a Security PIN
In the phone is already security PIN protected, you
You can protect each of the six cell phones with a security PIN.
need to enter the current security PIN before clearing
1. Press the PHONE button or the
button.
the PIN or creating a new one.
2. Rotate
to select Phone Setup, then
press
u Repeat the procedure to select
Passcode.
3. Select a phone you want to add a security
PIN to.
u Rotate to select a phone you want to
add a security PIN to, then press
4. You will receive a confirmation message on
the screen.
u Rotate to select Yes, then press
5. Enter a new four-digit number.
u Rotate to select, then press . Press
to delete. Press
to enter the
security PIN.
6. Re-enter the four-digit number.
u The screen returns to the screen in step
2.
202

uuBluetooth® HandsFreeLink®uHFL Menus
Automatic Transferring
If you get into the vehicle while you are on the phone, the call can be automatically
transferred to HFL.
1. Press the PHONE button or the
button.
2. Rotate
to select Phone Setup, then
press
u Repeat the procedure to select Auto
Transfer.
3. Rotate
to select On, then press
4. You will receive a notification on the screen
if the change is successful.
Caller’s ID Information
1Caller’s ID Information
You can select a caller’s information to be displayed when you have an incoming
Name Priority mode: A caller’s name is displayed if it
is stored in the phonebook.
call.
Number Priority mode: A caller’s phone number is
1. Press the PHONE button or the
button.
displayed.
2. Rotate
to select Phone Setup, then
press
u Repeat the procedure to select Caller ID
Info.
3. Rotate
to select a mode you want, then
press
4. You will receive a notification on the screen
if the change is successful.
Continued
203

uuBluetooth® HandsFreeLink®uHFL Menus
To Clear the System
Security codes, paired phones, all stored voice tags, all speed dial entries, and all
imported phonebook data are erased.
1. Press the PHONE button or the
button.
2. Rotate
to select Phone Setup, then
press
u Repeat the procedure to select System
Clear.
3. Rotate
to select Yes, then press
4. You will receive a notification message on
the screen. Rotate
to select Yes, then
press
5. You will receive a confirmation message on
the screen. Press
to finish.
204

uuBluetooth® HandsFreeLink®uHFL Menus
1Automatic Import of Cellular Phonebook and Call History
Automatic Import of Cellular Phonebook and Call History
When you select a person from the list in the cellular
When your phone is paired, the contents of its phonebook and call history are
phonebook, you can see up to three category icons.
automatically imported to HFL.
The icons indicate what types of numbers are stored
for that name.
Pref
Fax
Home
Car
Mobile
Message
Work
Other
Pager
Voice
On some phones, it may not be possible to import the
category icons to HFL.
The phonebook is updated after every connection.
Call history is updated after every connection or call.
Continued
205

uuBluetooth® HandsFreeLink®uHFL Menus
1Speed Dial
Speed Dial
You can use the audio preset buttons during a call to
Up to 15 speed dial numbers can be stored per phone.
store a speed dial number:
To store a speed dial number:
1. Press and hold the desired audio preset button
1. Press the PHONE button or the
button.
during a call.
2. Rotate
to select Phone Setup, then
2. The contact information for the active call will be
stored for the corresponding speed dial.
press
u Repeat the procedure to select Speed
When a voice tag is stored, press the
button to
Dial, then Add New.
call the number using the voice tag.
3. Rotate
to select a place to choose a
number from, then press
By Phonebook:
u Select a number from the linked cell
phone’s imported phonebook.
By Call History:
u Select a number from the call history.
By Phone Number:
u Input the number manually.
4. When the speed dial is successfully stored,
you are asked to create a voice tag for the
number. Rotate
to select Yes or No,
then press
5. Using the
button, follow the prompts to
say the name for the speed dial entry.
206

uuBluetooth® HandsFreeLink®uHFL Menus
To add a voice tag to a stored speed
1Speed Dial
dial number
Avoid using duplicate voice tag.
1. Press the PHONE button or the
button.
Avoid using “home” as a voice tag.
2. Rotate
to select Phone Setup, then
It is easier for HFL to recognize a longer name. For
press
example, use “John Smith” instead of “John.”
u Repeat the procedure to select Speed
Dial.
3. Select an existing speed dial entry.
4. Rotate
to select Store Voice Tag, then
press
5. Using the
button, follow the prompts to
complete the voice tag.
To delete a voice tag
1. Press the PHONE button or the
button.
2. Rotate
to select Phone Setup, then
press
u Repeat the procedure to select Speed
Dial.
3. Select an existing speed dial entry.
4. Rotate
to select Delete Voice Tag,
then press
u You will receive a confirmation message
on the screen. Rotate
to select Yes,
then press
Continued
207

uuBluetooth® HandsFreeLink®uHFL Menus
To delete a speed dial number
1. Press the PHONE button or the
button.
2. Rotate
to select Phone Setup, then
press
u Repeat the procedure to select Speed
Dial.
3. Select an existing speed dial entry.
4. Rotate
to select Delete Speed Dial,
then press
u You will receive a confirmation message
on the screen. Rotate
to select Yes,
then press
Making a Call
1Making a Call
Any voice-tagged speed dial entry can be dialed by
You can make calls by inputting any phone number, or by using the imported
voice from any screen.
phonebook, call history, speed dial entries, or redial.
Press the
button and follow the prompts.
The maximum range between your phone and
vehicles is 30 feet (10 meters).
Once a call is connected, you can hear the voice of
the person you are calling through the audio
speakers.
208

uuBluetooth® HandsFreeLink®uHFL Menus
To make a call using the imported
1To make a call using the imported phonebook
phonebook
This function is disabled while the vehicle is moving.
When your phone is paired, the contents of its
However, you can call a stored speed dial number
phonebook are automatically imported to
with a voice tag using voice commands.
HFL.
2 Limitations for Manual Operation P. 190
2 Speed Dial P. 206
1. Press the PHONE button or the
button.
2. Rotate
to select Phonebook, then press
3. The phonebook is stored alphabetically.
Rotate
to select the initial, then press
4. Rotate
to select a name, then press
5. Rotate
to select a number, then press
u Dialing starts automatically.
1To make a call using a phone number
To make a call using a phone number
This function is disabled while the vehicle is moving.
1. Press the PHONE button or the
button.
However, you can call a stored speed dial number
2. Rotate
to select Dial, then press
with a voice tag using voice commands.
3. Rotate
to select a number, then press
2 Limitations for Manual Operation P. 190
2 Speed Dial P. 206
4. Rotate
to select
, then press
u Dialing starts automatically.
Continued
209

uuBluetooth® HandsFreeLink®uHFL Menus
To make a call using redial
1. Press the PHONE button or the
button.
2. Rotate
to select Redial, then press
u Dialing starts automatically.
1To make a call using the call history
To make a call using the call history
Call history is stored by Dialed Calls,
The call history displays the last 20 dialed, received, or
missed calls.
Received Calls, and Missed Calls.
(Appears only when a phone is connected to HFL.)
1. Press the PHONE button or the
button.
2. Rotate
to select Call History, then press
3. Rotate
to select Dialed Calls, Received
1To make a call using a speed dial entry
Calls, or Missed Calls, then press
On the Phone screen, the first six speed dials on the
4. Rotate
to select a number, then press
list can be directly selected by pressing the
corresponding audio preset buttons (1-6).
u Dialing starts automatically.
Select More Speed Dial Lists to view another paired
To make a call using a speed dial entry
phone’s speed dial list.
1. Press the PHONE button or the
button.
2. Rotate
to select Speed Dial, then press
When a voice tag is stored, press the
button to
call the number using the voice tag.
3. Rotate
to select a number, then press
2 Speed Dial P. 206
Any voice-tagged speed dial entry can be dialed by
u Dialing starts automatically.
voice from any screen.
Press the
button and follow the prompts.
210

uuBluetooth® HandsFreeLink®uHFL Menus
1Receiving a Call
Receiving a Call
Call Waiting
When there is an incoming call, an audible
HFL Mode
Caller Name
Press the
button to put the current call on hold to
notification sounds (if activated) and the
answer the incoming call.
Incoming Call screen appears.
Press the
button again to return to the current
call.
Press the
button to answer the call.
Ignore the incoming call if you do not want to answer
Press the
button to decline or end the call.
it.
Press the
button if you want to hang up the
current call.
Continued
211
Оцените статью
Инструкции по ремонту
Добавить комментарий