Acura ILX Hybrid (2015 year). Instruction — page 6

uuGauges and Multi-Information DisplayuMulti-Information Display
SEL/RESET Button
SEL/RESET
SEL/RESET
Button
Button
Odometer
Trip A
Trip B
Outside temperature
Odometer
Shows the total number of miles or kilometers that your vehicle has accumulated.
Trip Meter
1Trip Meter
Switch between trip meter A and trip meter B by
Shows the total number of miles or kilometers driven since the last reset. Meters A
pressing the SEL/RESET button.
and B can be used to measure two separate trips.
Resetting a trip meter
To reset a trip meter, display it, then press and hold the SEL/RESET button. The trip
meter is reset to 0.0.
Continued
89

uuGauges and Multi-Information DisplayuMulti-Information Display
1Outside Temperature
Outside Temperature
The temperature sensor is in the front bumper.
Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).
Road heat and exhaust from another vehicle can
affect the temperature reading when your vehicle
Adjusting the outside temperature display
speed is less than 19 mph (30 km/h).
Adjust the temperature reading up to ±5°F or ±3°C if the temperature reading
seems incorrect.
It may take several minutes for the display to be
updated after the temperature reading has stabilized.
Fuel Economy Indicator
Use the multi-information display’s customized
The fuel economy indicator changes its size while driving. The indicator shrinks with
features to correct the temperature.
2 Customized Features P. 95
aggressive acceleration and deceleration, and grows back bigger again as fuel
economy gets better, and the halo appears around it when driving in the most fuel
efficient style.
Keep the indicator size as big as possible.
Sphere Size:
Maximum
Middle
Minimum
Fuel Economy:
Best
Better
Worse
Acceleration/
Slow
Moderate
Aggressive
Deceleration:
90

uuGauges and Multi-Information DisplayuMulti-Information Display
Average Fuel Economy Records
Latest Average Fuel Economy
Shows the average fuel economy for the last
three driving cycles (1-3), and the current
driving cycle (0) in mpg or l/100 km.
Each time you set the power mode to ON, the
display is updated, and the oldest record is
deleted.
Past Average Fuel Economy
Average Fuel Economy
1Average Fuel Economy
You can change when to reset the average fuel
Shows the estimated average fuel economy of each trip meter in mpg (U.S.) or l/100
economy is reset.
km (Canada). The display is updated at set intervals. When a trip meter is reset, the
2 Customized Features P. 95
average fuel economy is also reset.
Instant Fuel Economy
Shows the instant fuel economy as a bar graph in mpg or l/100 km.
Range
Shows the estimated distance you can travel on the remaining fuel. This distance is
estimated from the fuel economy of your previous trips.
1Elapsed Time
Elapsed Time
You can change when to reset the elapsed time.
Shows the time elapsed since Trip A or Trip B was reset.
Continued
91

uuGauges and Multi-Information DisplayuMulti-Information Display
1Average Speed
Average Speed
You can change when to reset the average speed.
Shows the average speed in mph or km/h since Trip A or Trip B was reset.
92

uuGauges and Multi-Information DisplayuMulti-Information Display
1IMA Battery Charge Level Indicator/Power Flow Monitor
IMA Battery Charge Level Indicator/Power Flow Monitor
The IMA battery charge level may decrease rapidly
Displays engine and IMA motor power flow and whether the system is assisting the
under the following conditions:
engine or charging the battery.
When the 12 volt battery has been replaced.
When the IMA battery has been disconnected.
Power Flow
When the IMA battery control system corrects its
Engine Operation Icon
reading.
Operating
The charge level reading will be corrected
automatically while driving.
Not operating
If the IMA battery becomes too hot or too cold, the
IMA battery icon
battery stops outputting to protect itself from
shows charge level.
damages. This disables the hybrid system assist and
Auto Idle Stop, even though the battery is
Power is supplied by the
Power is supplied by
wellcharged.
engine and the IMA motor is
only the IMA motor.
assisting the engine.
It takes a short time to normalize the IMA battery’s
output power depending on the weather.
The IMA motor is
Power is only supplied
Power is only supplied
charging the IMA
by the engine.
by the engine and the
battery.
IMA motor is charging
the IMA battery.
Continued
93

uuGauges and Multi-Information DisplayuMulti-Information Display
Engine Oil Life
Shows the remaining oil life and Maintenance MinderTM.
2 Maintenance MinderTM P. 263
94

uuGauges and Multi-Information DisplayuMulti-Information Display
1Customized Features
Customized Features
To customize other features, press the
Use the multi-information display to customize certain features.
button.
2 List of customizable options P. 97
How to customize
When you customize settings:
Press the
button to select CUSTOMIZE SETTINGS while the power mode
Shift to P
is in ON.
Multi-Information
Display:
Goes to customize
settings.
Button:
Changes the customize
menus and items
SEL/RESET Button:
Enters the selected item
Continued
95

uuGauges and Multi-Information DisplayuMulti-Information Display
Customization flow
Press the
button to select CUSTOMIZE SETTINGS and press the SEL/
RESET button.
CUSTOMIZE SETTINGS
SEL/RESET
METER SETUP
SEL/RESET
LANGUAGE SELECTION
ADJUST OUTSIDE TEMP. DISPLAY
“TRIP A” RESET TIMING
“TRIP B” RESET TIMING
KEYLESS START GUIDANCE SCREENS
KEYLESS ACCESS SETUP
SEL/RESET
DOOR UNLOCK MODE
KEYLESS ACCESS LIGHT FLASH
KEYLESS ACCESS BEEP
LIGHTING SETUP
SEL/RESET
INTERIOR LIGHT DIMMING TIME
HEADLIGHT AUTO OFF TIMER
AUTO LIGHT SENSITIVITY
DOOR SETUP
SEL/RESET
AUTO DOOR LOCK
AUTO DOOR UNLOCK
DOOR LOCK MODE
KEYLESS LOCK ACKNOWLEDGMENT
SECURITY RELOCK TIMER
MAINTENANCE INFO.
SEL/RESET
RESET/CANCEL
DEFAULT ALL
SEL/RESET
CANCEL/SET
96

uuGauges and Multi-Information DisplayuMulti-Information Display
List of customizable options
Customizable
Setup Group
Description
Selectable settings
Features
LANGUAGE
ENGLISH*1/FRENCH/
Changes the displayed language.
SELECTION
SPANISH
-5°F ~ ±0°F*1 ~ +5°F (U.S.)
ADJUST OUTSIDE
Adjusts the temperature reading by a few degrees.
TEMP. DISPLAY
-3°C ~ ±0°C*1 ~ +3°C
(Canada)
METER
SETUP
“TRIP A” RESET
Changes the setting of how to reset trip meter A, average
WITH REFUEL/IGN OFF/
TIMING
fuel economy A, average speed A, and elapsed time A.
MANUALLY RESET*1
“TRIP B” RESET
Changes the setting of how to reset trip meter B, average
WITH REFUEL/IGN OFF/
TIMING
fuel economy B, average speed B, and elapsed time B.
MANUALLY RESET*1
KEYLESS START
Changes the display of the keyless start guidance screens.
ON*1/OFF
GUIDANCE SCREENS
DOOR UNLOCK
Changes which doors unlock when you grab the driver’s
DRIVER DOOR ONLY*1/ALL
MODE
door handle.
DOORS
KEYLESS
KEYLESS ACCESS
Causes some exterior lights to blink when you unlock/lock
ACCESS
ON*1/OFF
LIGHT FLASH
the doors.
SETUP
KEYLESS ACCESS
Causes the beeper to sound when you unlock/lock the doors.
ON*1/OFF
BEEP
*1: Default Setting
Continued
97

uuGauges and Multi-Information DisplayuMulti-Information Display
Setup
Customizable Features
Description
Selectable settings
Group
INTERIOR LIGHT
Changes the length of time the interior lights stay
60sec/30sec*1/15sec
DIMMING TIME
on after you close the doors.
LIGHTING
HEADLIGHT AUTO OFF
Changes the length of time the exterior lights stay
60sec/30sec/15sec*1/0sec
SETUP
TIMER
on after you close the driver’s door.
AUTO LIGHT
Changes the timing for the headlights to come on.
MAX/HIGH/MID*1/LOW/MIN
SENSITIVITY
Changes the setting for when the doors
WITH VEH SPD*1/SHIFT FROM P /
AUTO DOOR LOCK
automatically lock.
OFF
DRIVER DOOR with SHIFT to P*1/
Changes the setting for when the doors
ALL DOORS with SHIFT to P/
AUTO DOOR UNLOCK
automatically unlock.
DRIVER DOOR with IGN OFF/ALL
DOORS with IGN OFF/OFF
DOOR
Sets up either the driver’s door or all doors to unlock
SETUP
DOOR LOCK MODE
DRIVER DOOR*1/ALL DOORS
on the first operation of the remote or Built-in key.
KEYLESS LOCK
LOCK/UNLOCK — The exterior lights flash
ON*1/OFF
ACKNOWLEDGMENT
LOCK (2nd push) — The beeper sounds
Changes the time it takes for the doors to relock and
SECURITY RELOCK
the security system to set after you unlock the
90sec/60sec/30sec
*1
TIMER
vehicle without opening any door.
*1:Default Setting
98

uuGauges and Multi-Information DisplayuMulti-Information Display
Setup Group
Customizable Features
Description
Selectable settings
MAINTENANCE INFO.
Resets the Maintenance MinderTM.
RESET/CANCEL
DEFAULT ALL
Sets/Cancels all the customized settings as default.
CANCEL/SET
Continued
99

uuGauges and Multi-Information DisplayuMulti-Information Display
Example of customization settings
The steps for changing the “TRIP A” RESET TIMING setting to ON are shown
below. The default setting for “TRIP A” RESET TIMING is MANUALLY RESET.
1. Press and release the
button
until CUSTOMIZE SETTINGS appears on
the display.
2. Press the SEL/RESET button to go into the
METER SETUP group.
3. Press the SEL/RESET button again.
u LANGUAGE SELECTION appears first
on the display.
4. Press the
button until “TRIP A”
RESET TIMING appears on the display,
then press the SEL/RESET button.
u The display switches to the SETUP
screen, where you can select WITH
REFUEL, IGN OFF, MANUALLY
RESET, or EXIT.
100

uuGauges and Multi-Information DisplayuMulti-Information Display
5. Press the
button and select
MANUALLY RESET, then press the SEL/
RESET button.
u The MANUALLY RESET setup screen
appears, then the display returns to the
customize item screen.
6. Press the
button until EXIT
appears on the display, then press the
SEL/RESET button.
7. Repeat Step 6 until you return to the
normal screen.
101

Setting the Clock
Clock
Models without navigation system
1Clock
You can adjust the time in the clock display, with the power mode in ON.
These indications are used to show how to operate
1. Press the SETUP button.
the selector knob.
SETUP Button
2. Rotate
to select Adjust Clock on the
Rotate
to select.
Press
to enter.
screen.
3. Press . Adjust Clock appears.
Models with navigation system
4. Rotate
to select the item you want to
The clock is automatically updated through the
adjust (12/24 hour mode, hour, minute).
navigation system, so the time does not need to be
adjusted.
Then press
5. Rotate
to make the adjustment.
6. Press
to enter your selection. The display
returns to Adjust Clock. Repeat steps 4 to
6 to adjust other items.
7. To enter the selection, rotate
and select
Set, then press
104

Locking and Unlocking the Doors
Key Types and Functions
This vehicle comes with the following keys:
1Key Types and Functions
All the keys have an immobilizer system. The
immobilizer system helps to protect against vehicle
Keys
theft.
Keyless access remote
2 Immobilizer System P. 118
Use the keyless access remote to start and
stop the engine, to lock and unlock the doors
The keys contain precision electronics.
Adhere to the following advice to prevent damage to
and to open the trunk.
the electronics:
Do not leave the keys in direct sunlight, or in
There is a PANIC button in the remote
locations with high temperature or high humidity.
transmitter.
Do not drop the keys or set heavy objects on them.
Keep the keys away from liquids.
Do not take the keys apart except for replacing the
battery.
The built-in key can be used to lock/unlock the
If the circuits in the keys are damaged, the engine
Built-in Key
may not start, and the keyless access system may not
doors when the keyless access remote battery
work.
becomes weak and the power door lock/
If the keys do not work properly, have them
unlock operation is disabled.
inspected by a dealer.
To remove the built-in key, pull it out while
pressing the release button. To reinstall the
built-in key, push the built-in key into the
Release Button
keyless access remote until it clicks.
Continued
105

uuLocking and Unlocking the DoorsuLow Keyless Access Remote Signal Strength
1Key Number Tag
Key Number Tag
Keep the key number tag separate from the key in a
Contains a number that you will need if you
safe place outside of your vehicle.
purchase a replacement key.
If you wish to purchase an additional key, contact a
dealer.
If you lose your key and you cannot start the engine,
contact a dealer.
Low Keyless Access Remote Signal Strength
1Low Keyless Access Remote Signal Strength
The vehicle transmits radio waves to locate the keyless access remote when locking/
Communication between the keyless access remote
and the vehicle consumes the keyless access remote’s
unlocking the doors, opening the trunk, or to start the engine.
battery.
Battery life is about two years, but this varies
In the following cases, locking/unlocking the doors, opening the trunk, or starting
depending on regularity of use.
the engine may be inhibited or operation may be unstable:
The battery is depleted whenever the keyless access
• Strong radio waves are being transmitted by nearby equipment.
remote is receiving strong radio waves. Avoid placing
• You are carrying the keyless access remote together with telecommunications
it near electrical appliances such as televisions and
equipment, laptop computers, cell phones, or wireless devices.
personal computers.
• A metallic object is touching or covering the keyless access remote.
106

uuLocking and Unlocking the Doors uLocking/Unlocking the Doors from the Outside
Locking/Unlocking the Doors from the Outside
1Locking/Unlocking the Doors from the Outside
Using the Remote Transmitter
You can lock or unlock doors using the remote
Locking the doors
transmitter or keyless access system only when the
LED
Press the LOCK button.
power mode is in VEHICLE OFF.
Lock
Once:
Unlock
Button
u Some exterior lights flash, all the doors
Button
lock, and the security system sets.
1Using the Remote Transmitter
Twice (within five seconds after the first
If you do not open a door within 30 seconds of
push):
unlocking the vehicle with the remote transmitter,
u The beeper sounds and verifies the
the doors will automatically relock.
security system is set.
You can change the relock timer setting.
2 Customized Features P. 95
Unlocking the doors
If the interior light switch is in the door activated
Press the UNLOCK button.
position, the interior lights come on when you press
Once:
the UNLOCK button.
u Some exterior lights flash twice, and the
No doors opened: The lights fade out after 30
driver’s door unlocks.
seconds.
Twice:
Doors relocked with the remote: The lights go off
u The remaining doors unlock.
immediately.
2 Interior Lights P. 141
The remote transmitter uses low-power signals, so
the operating range may vary depending on the
surroundings.
The remote will not lock the vehicle when a door is
open.
Continued
107
Оцените статью
Инструкции по ремонту
Добавить комментарий