Acura RL. Instruction — page 319

SHIFT SOLENOID VALVE REMOVAL AND INSTALLATION

1. Remove the mounting bolts, then remove the solenoid valves by holding the solenoid valve body.

2. Install the new O-rings (E) on each solenoid valve.

Fig. 472: Identifying Solenoid Valve With O-Rings With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.

3. Install shift solenoid valve D (black connector) by holding the shift solenoid valve body; be sure to install

the mounting bracket contacts to the accumulator body.

4. Install shift solenoid valve A (black connector) by holding the shift solenoid valve body; be sure the

mounting bracket contacts to the accumulator body.

5. Install shift solenoid valve C (brown connector) by holding the shift solenoid valve body; be sure the

mounting bracket contacts to the bracket of shift solenoid valve A.

6. Install shift solenoid valve B (brown connector) by holding the shift solenoid valve body; be sure the

mounting bracket contacts to the accumulator body.

TORQUE CONVERTER HOUSING

NOTE:

Do not hold the solenoid valve connector to remove and install the solenoid
valve. Be sure to hold the solenoid valve body.

NOTE:

A new solenoid valve comes with new O-rings. If you install the new
solenoid valve, use the O-rings provided with it.

NOTE:

Do not install shift solenoid valve C before installing shift solenoid valve
A. If shift solenoid valve C is installed before installing shift solenoid valve
A, it may damage to the hydraulic control system.

2007 Acura RL

2005-08 TRANSMISSION Automatic Transmission — RL

me

Friday, June 05, 2009 1:18:17 PM

Page 447

© 2005 Mitchell Repair Information Company, LLC.

MAINSHAFT BEARING AND OIL SEAL REPLACEMENT

Special Tools Required

Adjustable bearing puller, 25-40 mm 07736-A01000B or 07736-A01000A

Driver 07749-0010000

Attachment, 62 x 68 mm 07746-0010500

Attachment, 72 x 75 mm 07746-0010600

1. Remove the mainshaft bearing and oil seal using the adjustable bearing puller (25-40 mm) and a

commercially available 3/8 «-16 slide hammer (A).

Fig. 473: Removing Mainshaft Bearing And Oil Seal
Courtesy of AMERICAN HONDA MOTOR CO., INC.

2. Install the new mainshaft bearing until it bottoms in the housing using the driver and the attachment (62 x

68 mm).

Fig. 474: Tapping Mainshaft Bearing Until Into Housing
Courtesy of AMERICAN HONDA MOTOR CO., INC.

2007 Acura RL

2005-08 TRANSMISSION Automatic Transmission — RL

me

Friday, June 05, 2009 1:18:17 PM

Page 448

© 2005 Mitchell Repair Information Company, LLC.

3. Install the new oil seal flush to the housing using the driver and the attachment (72 x 75 mm).

Fig. 475: Tapping Oil Seal Into Housing
Courtesy of AMERICAN HONDA MOTOR CO., INC.

COUNTERSHAFT BEARING REPLACEMENT

Special Tools Required

Adjustable bearing puller, 25-40 mm 07736-A01000B or 07736-A01000A

Driver 07749-0010000

Attachment, 78 x 80 mm 07NAD-PX40100

1. Remove the countershaft bearing from the torque converter housing using the adjustable bearing puller

(25-40 mm) and a commercially available 3/8 «-16 slide hammer (A).

Fig. 476: Removing Countershaft Bearing From Torque Converter Housing
Courtesy of AMERICAN HONDA MOTOR CO., INC.

2. Install the ATF guide plate (A) into the housing, then install the new bearing (B) in the direction shown.

2007 Acura RL

2005-08 TRANSMISSION Automatic Transmission — RL

me

Friday, June 05, 2009 1:18:17 PM

Page 449

© 2005 Mitchell Repair Information Company, LLC.

Fig. 477: Installing New Bearinging Using ATF Guide Plate
Courtesy of AMERICAN HONDA MOTOR CO., INC.

3. Install the bearing (A) in the housing using the driver and the attachment (78 x 80 mm); install the

bearing outer notch-cut (B) to a depth (C) of 0-0.03 mm (0-0.001 in.) below the housing surface (D).

Fig. 478: Tapping Bearing Into Housing
Courtesy of AMERICAN HONDA MOTOR CO., INC.

SECONDARY SHAFT BEARING REPLACEMENT

Special Tools Required

Adjustable bearing puller, 25-40 mm 07736-A01000B or 07736-A01000A.

Bearing remover shaft set, 30 mm 07936-8890300

Bearing remover shaft handle 07936-3710100

Sliding hammer weight 07741-0010201

Driver 07749-0010000

2007 Acura RL

2005-08 TRANSMISSION Automatic Transmission — RL

me

Friday, June 05, 2009 1:18:17 PM

Page 450

© 2005 Mitchell Repair Information Company, LLC.

Оцените статью
Инструкции по ремонту
Добавить комментарий