Acura RL. Instruction — page 784

Fig. 238: Identifying Rear Differential Left Side Case And Rear Differential Right Side Case
With Torque Specifications

Courtesy of AMERICAN HONDA MOTOR CO., INC.

6. Install the rear differential (see REAR DIFFERENTIAL INSTALLATION ).

7. Test-drive the vehicle.

8. Check the differential fluid (see REAR DIFFERENTIAL FLUID INSPECTION AND

REPLACEMENT ).

SIDE CASE REPLACEMENT

1. Remove the rear differential (see REAR DIFFERENTIAL REMOVAL ).

2. Remove the rear differential right side case (A), the rear differential left side case (B), the 8×14 mm

dowel pins (C), and the O-rings (D) from the rear differential center case (E).

Fig. 239: Identifying Rear Differential Right Side Case And Rear Differential Left Side Case
Courtesy of AMERICAN HONDA MOTOR CO., INC.

3. Replace the new rear differential left side case and the new rear differential right side case.

4. Remove the dirt and oil from the sealing surfaces. Apply liquid gasket (P/N 08718-0001) to the

sealing surface. Make sure you seal the entire circumference of the bolt holes to prevent oil leakage.

Left side case

NOTE:

You must assemble the housings with you do in 5 minutes after
applying the liquid gasket. If not, the sealing surface must be
cleaned, and the liquid gasket reapplied.

Allow it to cure at least 30 minutes after assembly before filling
the differential with fluid.

2007 Acura RL

2005-08 DRIVELINE/AXLES Rear Differential — RL

me

Friday, June 05, 2009 3:02:19 PM

Page 163 © 2005 Mitchell Repair Information Company, LLC.

Fig. 240: Identifying Liquid Gasket Applying Area To Left Side Case
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Right side case

Fig. 241: Identifying Liquid Gasket Applying Area To Right Side Case
Courtesy of AMERICAN HONDA MOTOR CO., INC.

5. Install the six 8 x 14 mm dowel pins (A), the new O-rings (B), the rear differential left side case (C),

the rear differential right side case (D) on the rear differential center case (E).

2007 Acura RL

2005-08 DRIVELINE/AXLES Rear Differential — RL

me

Friday, June 05, 2009 3:02:19 PM

Page 164 © 2005 Mitchell Repair Information Company, LLC.

Fig. 242: Identifying Rear Differential Left Side Case And Rear Differential Right Side Case
With Torque Specifications

Courtesy of AMERICAN HONDA MOTOR CO., INC.

6. Install the rear differential (see REAR DIFFERENTIAL INSTALLATION ).

7. Test-drive the vehicle.

8. Check the differential fluid (see REAR DIFFERENTIAL FLUID INSPECTION AND

REPLACEMENT ).

2007 Acura RL

2005-08 DRIVELINE/AXLES Rear Differential — RL

me

Friday, June 05, 2009 3:02:19 PM

Page 165 © 2005 Mitchell Repair Information Company, LLC.

2005-08 SUSPENSION

Rear Suspension — RL

KNUCKLE/HUB BEARING UNIT REPLACEMENT

EXPLODED VIEW

Fig. 1: Exploded View Of Knuckle/Hub Bearing Unit With Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.

Special Tools Required

Ball joint remover, 32 mm 07MAC-SL0A102

HUB BEARING UNIT REPLACEMENT

1. Raise the rear of the vehicle, and support it with safety stands in the proper locations (see LIFT AND

SUPPORT POINTS ).

2007 Acura RL

2005-08 SUSPENSION Rear Suspension — RL

2007 Acura RL

2005-08 SUSPENSION Rear Suspension — RL

me

Friday, June 05, 2009 1:21:25 PM

Page 1

© 2005 Mitchell Repair Information Company, LLC.

me

Friday, June 05, 2009 1:21:28 PM

Page 1

© 2005 Mitchell Repair Information Company, LLC.

Оцените статью
Инструкции по ремонту
Добавить комментарий