Acura RL. Instruction — page 797

The operation of the driver’s seat position sensor must be checked after any of these actions (see
DRIVER’S SEAT POSITION SENSOR OPERATION CHECK ):

Driver’s seat position sensor replacement

Cover plate (front side of driver’s seat slide rail) replacement

SEAT CUSHION — PASSENGER’S SEAT

NOTE:

Put on gloves to protect your hands.

Apply oil to the pivot portions of the slide lock.

Apply multipurpose grease to the sliding parts and pivot portions of the
seat tracks.

Fig. 16: Identifying Seat Cushion Components And Fasteners With Torque
Specifications (Driver’s Seat)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

2007 Acura RL

2005-08 ACCESSORIES AND EQUIPMENT Seats — RL

me

Friday, June 05, 2009 3:27:16 PM

Page 10

© 2005 Mitchell Repair Information Company, LLC.

The front passenger’s weight sensor (SWS) unit must be calibrated after any of these actions (see
FRONT PASSENGER’S WEIGHT SENSOR UNIT CALIBRATION ):

Front passenger’s seat replacement (including any seat components)

Replacement of the seat weight sensors

Replacement of the front passenger’s weight sensor unit

NOTE:

Put on gloves to protect your hands.

Apply oil to the pivot portions of the slide locks.

Apply multipurpose grease to the sliding parts of the seat tracks.

When tightening the weight sensor mounting bolts, tighten the bolts in
the sequence shown. Improper tightening could cause the front
passenger’s airbag system to malfunction.

Make sure the weight sensor unit connectors are plugged in properly.

Make sure the weight sensor wires are routed properly so they are not
pinched and do not interfere with other parts.

Fig. 17: Identifying Seat Cushion Components And Fasteners With Torque

2007 Acura RL

2005-08 ACCESSORIES AND EQUIPMENT Seats — RL

me

Friday, June 05, 2009 3:27:16 PM

Page 11

© 2005 Mitchell Repair Information Company, LLC.

FRONT SEAT LINKAGE DISASSEMBLY/REASSEMBLY

DRIVER’S SEAT

The operation of the driver’s seat position sensor must be checked after any of these actions (see
DRIVER’S SEAT POSITION SENSOR OPERATION CHECK ):

Driver’s seat position sensor replacement

Cover plate (front side of driver’s seat slide rail) replacement

PASSENGER’S SEAT

The front passenger’s weight sensor (SWS) unit must be calibrated after any of these actions (see
FRONT PASSENGER’S WEIGHT SENSOR UNIT CALIBRATION ):

Front passenger’s seat replacement (including any seat components)

Specifications (Passenger’s Seat)
Courtesy of AMERICAN HONDA MOTOR CO., INC.

NOTE:

Put on gloves to protect your hands.

Apply oil to the pivot portions of the slide lock.

Apply multipurpose grease to the sliding portions and pivot portions of
the seat tracks.

Fig. 18: Identifying Driver’s Seat Components And Fasteners With Torque
Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.

2007 Acura RL

2005-08 ACCESSORIES AND EQUIPMENT Seats — RL

me

Friday, June 05, 2009 3:27:16 PM

Page 12

© 2005 Mitchell Repair Information Company, LLC.

Replacement of the seat weight sensors

Replacement of the seat weight sensor unit

FRONT SEAT LUMBAR SUPPORT REPLACEMENT

SRS components are located in this area. Review the SRS component locations (see COMPONENT
LOCATION INDEX
) and the precautions and procedures (see PRECAUTIONS AND PROCEDURES )
before doing repairs or service.

NOTE:

Put on gloves to protect your hands.

Apply oil to the pivot portions of the slide locks.

Apply multipurpose grease to the sliding portions of the seat tracks.

When tightening the weight sensor mounting bolts, tighten the bolts in
the sequence shown. Improper tightening could cause the front
passenger’s airbag system to malfunction.

Make sure the weight sensor unit connectors are plugged in properly.

Make sure the weight sensor wires are routed properly so they are not
pinched and do not interfere with other parts.

Fig. 19: Identifying Passenger’s Seat Components And Fasteners With
Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.

2007 Acura RL

2005-08 ACCESSORIES AND EQUIPMENT Seats — RL

me

Friday, June 05, 2009 3:27:16 PM

Page 13

© 2005 Mitchell Repair Information Company, LLC.

Оцените статью
Инструкции по ремонту
Добавить комментарий