Acura TSX / Honda Accord CL. Instruction — page 307

Fig. 43: Checking Clearance Between Ear Portion Of Boot Band
Courtesy of AMERICAN HONDA MOTOR CO., INC.

INTERMEDIATE SHAFT

Disassembly

1. Remove the set ring (A), outer seal (B) and the external snap ring (C). See Fig. 44 .

2. Press the intermediate shaft (A) out of the intermediate shaft bearing (B) using the special tools and a

press. Be careful not to damage the metal rings (C) on the intermediate shaft during disassembly. See Fig.
45
.

3. Remove the internal snap ring. See Fig. 46 .

4. Press the intermediate shaft bearing (A) out of the bearing support (B) using the oil seal driver, half shaft

base and a press. See Fig. 47 .

2004 Acura TSX

2004 DRIVE AXLES Axle Shafts — Front — TSX

Fig. 44: Removing Set Ring, Outer Seal & External Snap Ring
Courtesy of AMERICAN HONDA MOTOR CO., INC.

2004 Acura TSX

2004 DRIVE AXLES Axle Shafts — Front — TSX

Fig. 45: Removing Intermediate Shaft
Courtesy of AMERICAN HONDA MOTOR CO., INC.

2004 Acura TSX

2004 DRIVE AXLES Axle Shafts — Front — TSX

Fig. 46: Removing Internal Snap Ring
Courtesy of AMERICAN HONDA MOTOR CO., INC.

2004 Acura TSX

2004 DRIVE AXLES Axle Shafts — Front — TSX

Оцените статью
Инструкции по ремонту
Добавить комментарий