Acura TSX / Honda Accord CL. Instruction — page 991

1. Connect the HDS to the DLC (A).

Fig. 219: Connecting The HDS To The DLC

2. Select SHIFT SOL TEST in MISC. TEST MENU on the HDS.

3. Carry out A/T SHIFT SOL A, B, C, D, and E tests in SHIFT SOL TEST MENU with the HDS. A

clicking sound should be heard.

4. Shift solenoid valves test has finished if the test results are OK. If no sound is heard, remove the shift

solenoid valves and test.

5. Remove the splash shield.

6. Remove the drain plug (A), and drain the automatic transmission fluid (ATF). Then reinstall the drain

plug with a new sealing washer (B).

2004 Acura TSX

2004 AUTOMATIC TRANSMISSIONS Diagnosis — MCTA 5-Speed

Fig. 220: Removing The Drain Plug

7. Disconnect the battery negative terminal, then disconnect the battery positive terminal.

8. Remove the battery hold-down bracket, then remove the battery cover, battery, and battery tray.

9. Remove the intake air duct and air cleaner housing.

10. Loosen the two bolts securing the battery base from under the vehicle, and remove the two bolts securing

the battery base in the engine compartment, then remove the battery base.

11. Remove the ground cable (A), transmission upper mount bracket (B), and bracket plate (C).

2004 Acura TSX

2004 AUTOMATIC TRANSMISSIONS Diagnosis — MCTA 5-Speed

Fig. 221: Removing The Ground Cable, Transmission Upper Mount Bracket & Bracket Plate

12. Place a transmission jack under the transmission, and remove the transmission lower mount nuts.

2004 Acura TSX

2004 AUTOMATIC TRANSMISSIONS Diagnosis — MCTA 5-Speed

Fig. 222: Removing The Transmission Lower Mount Nuts

13. Lift the transmission up to create clearance between the transmission and front subframe with the jack.

14. Remove the ATF dipstick, and remove the bolts securing the ATF cooler inlet line brackets (A) and ATF

dipstick guide pipe (B) from the transmission hanger (C).

2004 Acura TSX

2004 AUTOMATIC TRANSMISSIONS Diagnosis — MCTA 5-Speed

Оцените статью
Инструкции по ремонту
Добавить комментарий